DS18B20 Temperature Sensor with ESP32

DS18B20 Temperature Sensor Setup

Temperature sensor DS18B20 with ESP32 from TTGO

Introduction

This project is for testing purpose and provides a working example to measure the temperature by using a DS18B20 temperature sensor which works via the Dallas’ 1-Wire bus. Several sensors are able to use the same wire for communication. See the schematic below.

Usage

Just compile and upload the “.ino” file to the board, connect the sensors and very important the 4.7K Ohm resistor as stated below.

Schematic

DS18B20 bus

Components

Tobias Klingel
Tobias Klingel
Head of Information Security